Electrical Audits & Compliance

Find the hazards and the waste in your electrical system before they cost you. You get a clear report and a priority list of fixes.
The problem

Electrical Systems Rarely Fail Without Warning

Older systems give signs before they fail. A loose termination heats up. An earth pit dries out. A breaker that hasn’t tripped in years won’t trip when it should. Meanwhile, your electricity bill keeps climbing.

An audit catches these problems while they’re still small and cheap to fix, and long before they turn into a fire, a shutdown or a failed inspection.

Types of audit

1. Electrical Audit

A full health check of your electrical installation.

Inspection of panels, switchgear, wiring and terminations
Insulation resistance and earth resistance testing
Load and capacity check against your current and planned demand
Report with findings and recommended upgrades

2. Safety Audit

Makes sure your system protects your people and your property, and meets the code.

Compliance check against applicable electrical codes and regulations
Earthing and bonding verification
Testing of circuit breakers and protection devices
Review of emergency shutdown procedures, exits and safety equipment
Review of maintenance logs, inspection records and training documents

3. Energy Audit

Shows where your power goes and how to spend less on it.

Consumption analysis and load profiling
Power quality assessment, including power factor and harmonics
Evaluation of equipment efficiency, lighting and motors
Savings recommendations with estimated cost and payback
What you receive

What You Get at the End

A written report with photos, a list of risks ranked by urgency, estimated savings where they apply and a practical plan to fix each issue. If you want, our team can carry out the fixes too.

When to book

When an Audit Makes Sense

Before you buy, lease or renovate a building
When power bills rise without an obvious reason
After a fire, a near miss or repeated tripping
Before adding new machinery, floors or rooms
As part of annual compliance or an insurance review

When in Doubt, Put Safety First

If you’re ever unsure or feel unsafe, don’t take chances—call a licensed emergency electrician. Safety always comes first. Feel free to contact us or give us a call.

Common Questions

Frequently Asked Questions

It depends on the size of the site. After a short walkthrough, we’ll give you a fixed timeline before we start.

Most of the work happens while you run as normal. For tests that need a brief shutdown, we’ll plan them with you in advance.

Yes, if you want us to. You’re free to use the report with any contractor.

Schedule a Service